Free embroidery pattern ·
Christmas Angel Embroidery Pattern: Free Beginner Hoop
Free pattern. Beginner friendly. About 1 to 1.5 hours.
How do you make the christmas angel embroidery hoop? This free Christmas angel embroidery pattern is a beginner hoop: a little angel outlined in backstitch with a gold halo, a round face with a brown fringe, black French-knot eyes and rosy cheeks, a baby-blue robe and two grey wings with feather lines, with gold French-knot sparkles inside a dotted gold ring. Four stitches, eight DMC colours, about 1 to 1.5 hours, with a true-size template.
| Finished size | about 4.2 in design in a 6 in (15 cm) hoop |
|---|---|
| Stitches | 4: running, back, straight, French knot |
| Threads | 8 DMC colours, 2 strands |
| Fabric | Cream or natural linen, 10 x 10 in |
| Level | Beginner |
| Time | about 1 to 1.5 hours |
| Price | Free |
Printable PDF (free) Save it on Pinterest
What you need
- 10 x 10 in cream or natural linen or linen-cotton
- DMC floss: 729, 725, 945, 801, 334, 415, 310, 3326 (one skein each)
- 6 in embroidery hoop and a size 7 embroidery needle
- Water-soluble fabric pen, scissors
How it's made, in short
- Transfer the design. Print the template at 100%, check the 1 in square, and trace it onto the fabric with a water-soluble pen.
- Hoop the fabric. Put the fabric in a 6 in hoop, drum tight.
- Step 1. Stitch the dotted gold ring around the design in running stitch.
- Step 2. Backstitch the halo as a closed flat oval just above the head, ending in the hole you started from.
- Step 3. Backstitch the face as a closed circle, starting and ending at the bottom of the chin. Keep the stitches short so the circle stays round.
- Step 4. Backstitch the fringe in one curve across the top of the face, from the face line on the left to the face line on the right.
- Step 5. Backstitch the robe in one line: start at the neck on the left, go down the left side to the hem, along the curved hem, and up the right side to the neck.
- Step 6. Backstitch each wing in one line: start on the side of the robe below the neck, go up and out to the wing tip, and come back to end on the robe lower down. Put a stitch end exactly on the tip.
- Step 7. Add two straight stitches inside each wing for the feather lines, four in all.
- Step 8. Add two black French knots for the eyes, side by side under the fringe.
- Step 9. Add two rose French knots for the cheeks, just below and outside the eyes.
- Step 10. Add eight gold French knots around the angel for the sparkles, spaced apart and clear of the lines.
- Finish. Rinse out the pen lines, press, re-hoop and gather the back with a running stitch.
Free guides: Free embroidery patterns · How to do a French knot in embroidery · How to cross stitch · Cross stitch pattern maker
Tips
- Stitch the robe before the wings, so each wing can start and end exactly on the robe line.
- Work the eyes and cheeks with only two wraps so they stay small on the little face.
- Add the sparkles last, so you can space the knots by eye around the angel.
The free pattern
Stitch names follow the common English names.
Size: design about 4.2 x 4.2 in (11 x 11 cm), for a 6 in (15 cm) hoop
Fabric: a 10 x 10 in (25 x 25 cm) square of cream or natural linen or linen-cotton, washed and pressed
Threads: DMC 6-strand embroidery floss, one skein of each colour; use 2 strands throughout. Lengths are the 2-strand thread you stitch with, with spare, cut in 18 in (45 cm) pieces:
- DMC 729 Medium Old Gold: about 24 in (61 cm)
- DMC 725 Medium Light Topaz: about 29 in (74 cm)
- DMC 945 Tawny: about 11 in (28 cm)
- DMC 801 Dark Coffee Brown: about 6 in (15 cm)
- DMC 334 Medium Baby Blue: about 23 in (58 cm)
- DMC 415 Pearl Gray: about 31 in (79 cm)
- DMC 310 Black: about 8 in (20 cm)
- DMC 3326 Light Rose: about 8 in (20 cm)
Notions: 6 in embroidery hoop, size 7 embroidery needle, water-soluble fabric pen or a light pencil, scissors
Stitches: running stitch, backstitch, straight stitch, French knot
Transfer
Print the template page at 100% (actual size) and measure the 1 in scale square; if it is not exactly 1 in, check the print setting. Tape the template to a window, centre the fabric over it and trace the halo, the face with its fringe, eyes and cheeks, the robe, the two wings with their feather lines, the eight sparkle dots and the ring with the pen.
Put the fabric in the hoop so it is drum tight, with the screw at the top.
Stitch guide
Running stitch: Bring the needle up on the line, go down 1/8 in further along, come up again 1/16 in on, and repeat, so you get even dashes with gaps between them.
Backstitch: Bring the needle up one stitch length along the line, go down at the start of the line, then come up one stitch length ahead of your last stitch and go back down into the end of it, so the stitches touch.
Straight stitch: One single stitch: come up at the inner end of the line and go down at the outer end, keeping the thread smooth and not too tight so it lies flat.
French knot: Come up where the knot goes, wrap the thread twice around the needle, hold the wraps snug with your other hand, and go down right next to where you came up, pulling the thread through slowly.
Order of work
- Stitch the dotted gold ring around the design in running stitch. DMC 729, 2 strands.
- Backstitch the halo as a closed flat oval just above the head, ending in the hole you started from. DMC 725, 2 strands.
- Backstitch the face as a closed circle, starting and ending at the bottom of the chin. Keep the stitches short so the circle stays round. DMC 945, 2 strands.
- Backstitch the fringe in one curve across the top of the face, from the face line on the left to the face line on the right. DMC 801, 2 strands.
- Backstitch the robe in one line: start at the neck on the left, go down the left side to the hem, along the curved hem, and up the right side to the neck. DMC 334, 2 strands.
- Backstitch each wing in one line: start on the side of the robe below the neck, go up and out to the wing tip, and come back to end on the robe lower down. Put a stitch end exactly on the tip. DMC 415, 2 strands.
- Add two straight stitches inside each wing for the feather lines, four in all. DMC 415, 2 strands.
- Add two black French knots for the eyes, side by side under the fringe. DMC 310, 2 strands.
- Add two rose French knots for the cheeks, just below and outside the eyes. DMC 3326, 2 strands.
- Add eight gold French knots around the angel for the sparkles, spaced apart and clear of the lines. DMC 725, 2 strands.
Finishing
- Rinse the fabric in cool water to remove the pen lines, roll it in a towel and press it face down on a soft towel.
- Put it back in the hoop centred, tighten the screw, and trim the fabric to 1 in outside the hoop.
- Run a running stitch around that edge, pull it up at the back like a drawstring, and tie off.
Counts: 43 running stitch dashes in the ring, 1 backstitched gold halo, 1 backstitched tawny face with a brown fringe, 2 black French-knot eyes and 2 rose French-knot cheeks, 1 backstitched blue robe, 2 backstitched grey wings with 4 straight-stitch feather lines, and 8 gold French-knot sparkles.
How we checked it: xstitchlib/embroidery.py: 4 stitch names in the dictionary, each explained; 8 DMC threads listed and used; hoop 6 in for the design; scale square; lengths fit one skein each. We work hard to get every number right, but mistakes can still happen; tell us at hello@craftuary.com if anything is off.
Want it on paper?
The printable PDF (US Letter and A4) is free with a Craftuary account.
Get free PDFQuestions
How do you embroider a Christmas angel?
Backstitch the halo and the round face first, then the fringe, then the robe from the neck round the hem and back, then the two wings from the robe out to their tips, and finish with French-knot eyes, cheeks and sparkles.
What colours do you need for an embroidered angel?
This pattern uses DMC 334 baby blue for the robe, 415 pearl grey for the wings, 945 tawny for the face, 801 brown for the fringe, 310 black for the eyes, 3326 rose for the cheeks and 725 and 729 golds for the halo, sparkles and ring.
How do you keep the face and halo round?
Follow the traced curve closely, putting every stitch end exactly on the line, and end the last stitch in the hole the first one started from.
How big is this angel embroidery?
The design is about 4.2 inches across and fits a 6 inch hoop with room around it.
How many strands of embroidery floss should I use?
Two strands of DMC 6-strand floss for every stitch in this pattern; separate them from an 18 inch length.
The pictures are drawn from the pattern's own measurements and stitches; your finished piece will vary a little with your materials.
- Santa Hat Embroidery Pattern: Free Beginner Christmas Hoop
- Christmas Lights Embroidery Pattern: Free Beginner Hoop
- Cardinal Embroidery Pattern Free: Beginner Hoop
- Snow Globe Embroidery Pattern: Free Beginner Hoop
- Free Snowflake Cross Stitch Pattern: Small Christmas Chart
- Christmas Bell Embroidery Design: Free Beginner Hoop
Embroidery and cross stitch patterns: every embroidery pattern on Craftuary.
Embroidery guides: free how-to guides.
Other crafts: Crochet patterns · Sewing patterns · Knitting patterns